Microtek MV300 - Manual (Page 40)

40
Appendix C – Troubleshooting
A1: The DV camera is not powered up.
• Press and hold the POWER button for a few moments to see if the
READY LED is lit.
A2: The battery is inserted incorrectly.
• Insert the battery with the correct polarity as marked in the battery
compartment.
A3: The battery has poor electrical contact with the terminals in the
battery compartment.
• Clean the battery terminals with a dry cloth, reinsert them, and try
to power on the DV camera again.
A4: Battery power is depleted.
• Recharge the battery if it is rechargeable, or replace the batteries
with new ones.
A5: The incorrect type of battery is being used.
• Replace with four new AAA-size alkaline batteries.
• Replace with a new Lithium ion battery (Nokia 8210 compatible).
A6: The battery/SD card cover is open.
• Close the battery/SD cover securely.
A1: Your DV camera has a two-minute time-out setting for saving the
battery consumption.
• You can disable the “Power Saving” feature in the DV camera's
Setup mode menu. Press any button to turn the DV camera back on.
A2: Battery power is depleted.
• Recharge the batteries if they are rechargeable, or replace the
batteries with new ones.
DV Camera Problems
The DV camera does not power on.
The DV camera turns off suddenly.