beautypg.com

MITSUBISHI ELECTRIC WD-52631 User Manual

Page 86

background image

86

Chapter 7. Using IEEE 1394 Devices

Switching Between Analog and
Digital IEEE 1394 Outputs

To enable switching between analog and digital outputs,
you must have check marked the

Analog Connection

box when the New 1394 Device screen displayed when
you first connected the device. See the section “Before
You Begin” in chapter 2, “TV Connections.”

Figure 5. The ClearThought Auto Input sensing screen
for IEEE 1394 devices. Place a check in the Analog
Connection box if your device has both analog and digital
outputs.

1. Press

INPUT to display the Input Selection menu.

2. Highlight the icon for the IEEE 1394 device and press

ENTER.

3. Press to switch between icons representing the

analog and digital outputs of the device. See figure
6.

Figure 6. The Input Selection menu shows icons for the
analog and digital outputs of the IEEE 1394 device.

4. Press

ENTER to select the device output.

This manual is related to the following products: