MITSUBISHI ELECTRIC WD-52631 - Manual (Page 36)

36 Chapter 3. TV Operation
Choosing a Program Source
NOTE: If your only viewing sources are connected to the
ANT 1 and ANT 2 antenna jacks, you can switch
inputs without the Input Selection menu. Press
INPUT to switch between ANT 1 and ANT 2. To
verify which is the current source while watching
TV, press INFO to see the on-screen status display.
Selecting from Multiple Sources: The Input
Selection Menu
The Input Selection menu allows you to select an input to
watch on the TV. The current input appears as a gold-
colored icon.
1. Press INPUT on the TV’s remote control to display the
Input Selection menu (Figure 2).
2. To select a different input, press on the TV’s
remote control to move the highlight through icons in
the input section.
3. Press ENTER to switch to the device and close the menu.
More About the Input Selection Menu
• To assign meaningful labels to the icons, such as
“VCR” or “DVD,” see the “Input Name” section of
chapter 4, “TV Menu Settings.”
• To rearrange the icons, see the “Icon Order” section of
chapter 4, “TV Menu Settings.”
• To use with IEEE 1394 devices, see additional informa-
tion in chapter 7, “Using IEEE 1394 Devices.”
Input Section
Figure 2. Input Selection menu
ChannelView™ Channel Listings
ChannelView provides listings, as sent by the broadcast-
ers, for memorized channels on
ANT 1 or ANT 2. Digital
channels are indicated with a “D” and analog channels
with an “A.” Digital channels are shown with the major
channel and sub-channels (or bitstreams). The analog
channel name is displayed if you entered a name in the
Channedl menu.
Note: If limited data is shown or no program data ap-
pears, it is because the broadcaster is not sending
the information. This is not a defect of your TV.
Using ChannelView
Feature Instructions
View listings while viewing
ANT 1 or ANT 2.
Press GUIDE.
Scan through memorized
channels one by one.
Press or .
Scan quickly through memo-
rized channels.
Press PAGE / .
View detailed information for
digital channels. Press or to highlight
a channel and press .
Return to viewing basic list-
ings information
Press .
Figure 3. ChannelView screen, current programs. Use
to exchange displays for current and future programs.
Figure 4. ChannelView screen, future programs on the
selected channel (digital channels only)
IMPORTANT
To receive ChannelView updates: Set the
Energy Mode to Fast Power On and leave the
TV powered off for a while each day. If the TV
loses power, program listings will be lost until
the next update.