MITSUBISHI ELECTRIC WD-52631 - Manual (Page 40)

40 Chapter 3. TV Operation
Split Screen
Split Screen allows you to view pictures from two different
sources at the same time. Split Screen is available when
you have video sources connected to the TV in addition to
a connection to
ANT 1 or ANT 2.
Operation
IMPORTANT
Split Screen is unavailable if:
• Your only inputs are ANT 1 and ANT 2.
• Either picture source is a 1080p signal from
an HDMI jack.
• Either picture source is from a personal
computer.
Split Screen Operations Instructions
Turn Split Screen on or off Press SPLIT.
Switch the sound source between main
and sub-pictures.
Press or . The speaker icon appears briefly to indicate the
sound source as either the main picture (left) or sub-picture
(right). The sound source is the side you can control with the
remote control.
Check which picture is the sound source.
Press INFO. The speaker icon appears in the status display to indicate the
sound source.
Change the source of the sub-picture.
1. Press to make the sub-picture the sound source.
2. Press
INPUT and move the highlight to the icon for the input you wish
to view as the sub-picture (see figure 5).
3. Press ENTER to make the change.
Grayed-out input icons are unavailable as Split Screen sources or with
the current source.
Change channels (when the input source is
ANT 1 or ANT 2). Press to make the sub-picture the sound source then press CH / .
Freeze or unfreeze the sub-picture. Press (PAUSE). Press again to return to normal moving video.
Change the size of the main and sub-
pictures. Repeatedly press FORMAT to cycle through picture sizes. See the follow-
ing page for sample displays.
Make the sub picture fill the screen.
1. Press to make the sub-picture the sound source.
2. Press
SPLIT to close Split Screen mode.
Figure 5. Change the source of the sub-picture with the
Split Screen Input Selection menu.
Choice of Split Screen
sub-Picture Sources
“SPLIT” appears under the
Video icon to distinguish
this menu from the Input
Selection menu.