Motorola 4550 - Manual (Page 78)

Keyp
ad
Mic
rophone
Fe
ature
s
English
68
4 P or Q to the required missed call alias or ID and press
N to select.
5 P or Q to Store and press N to select.
6 A blinking cursor appears. If needed, key in the alias for that
ID and press
N .
7 The display shows Contact Saved.
You can also store an ID without an alias.
Making a Call Alert by Manual Dial
Procedure:
1 S to access the menu.
2 P or Q to Contacts and press N to select.
3 P or Q to Manual Dial and press N to select.
4 A blinking cursor appears. Enter the subscriber ID you want
to send the Call Alert to and press
N .
5 P or Q to Call Alert and press N to select.
6 The display shows Call Alert: ,
confirming that the Call Alert has been sent.
7 The green LED lights up when your radio is sending the Call
Alert.
8 If the Call Alert acknowledgement is received, a tone
sounds and the display shows Call Alert Successful.
OR
If the Call Alert acknowledgement is not received, a tone
sounds and the display shows Call Alert Failed.
Text Messaging
The maximum length of characters for a text message,
including the subject line (seen when receiving message from
an e-mail application), is 138.
The radio exits the current screen once the inactivity timer
expires. Any text message in the writing/editing screen will
automatically be saved to the Drafts folder.
NOTE: Long press R at any time to return to the Home
screen.
Writing and Sending a Text Message
Procedure:
Press the programmed Text Messaging button and proceed to
Step 3.
OR
Follow the procedure below.
1 S to access the menu.
NAG_6880309T15.book Page 68 Tuesday, March 9, 2010 11:47 AM