Motorola 4550 - Manual (Page 76)

Keyp
ad
Mic
rophone
Fe
ature
s
English
66
Initiating Remote Monitor by Manual Dial
Procedure:
1 S to access the menu.
2 P or Q to Contacts and press N to select.
3 P or Q to Manual Dial and press N to select.
4 If there is a previously dialed subscriber ID, the ID appears
along with a blinking cursor.
Use the keypad to edit the subscriber ID. Press
N to
select.
OR
Use the keypad to enter a new subscriber ID. Press
N to
select.
5 P or Q to Remote Mon. and press N to select.
6 Wait for acknowledgment.
7 The display shows Remote Monitor Successful.
OR
The display shows Remote Monitor Failed.
8 If successful:
Once the timer expires, the radio sounds an alert tone and
the green LED turns off. The display shows Remote
Monitor Ended.
OR
If unsuccessful:
The radio repeats the attempt until the programmed number
of tries expires.
Making a Private Call by Manual Dial
Procedure:
1 S to access the menu.
2 P or Q to Contacts and press N to select.The
entries are alphabetically sorted.
3 P or Q to Manual Dial and press N to select.
4 If there is a previously dialed subscriber ID, the ID appears
along with a blinking cursor.
Use the keypad to edit the subscriber ID.
OR
Use the keypad to enter a new subscriber ID.
5 Press the PTT button to make the call. The green LED lights
up. The first line displays the target radio’s ID. The second
line displays Private Call and the Private Call icon.
NAG_6880309T15.book Page 66 Tuesday, March 9, 2010 11:47 AM