Programmable buttons, Assignable radio functions, Identifying radio controls – Motorola 4550 User Manual
Page 14

Identifying Radio Controls
English
4
Programmable Buttons
Your dealer can program the programmable buttons as
shortcuts to radio functions or up to a maximum of six (6)
preset channels/groups depending on the duration of a button
press:
•
Short press
–
Pressing and releasing rapidly (0.05 seconds).
•
Long press
–
Pressing and holding for the programmed
duration (between 1.00 second and 3.75 seconds).
•
Hold down
–
Keeping the button pressed.
NOTE: The programmed duration of a button press is
applicable for all assignable radio/utility functions or
settings. See Emergency Operation on page 36 for
more information on the programmed duration of the
Emergency button.
Assignable Radio Functions
Contacts
–
Provides direct access to the Contacts list.
Emergency
–
Depending on the programming, initiates or
cancels an emergency alarm or call.
Ext PA On/Off
–
Toggles the audio routing between the
connected public address (PA) loudspeaker amplifier and the
radio’s internal public address (PA) system.
Manual Site Roam*
–
Starts the manual site search.
Manual Dial
–
Initiates a call by keying in any subscriber
ID. Only available with a keypad microphone.
Nuisance Channel Delete*
–
Temporarily removes an
unwanted channel, except for the Selected Channel, from the
scan list. The Selected Channel refers to the user’s selected
zone/channel combination from which scan is initiated.
One Touch Access
–
Directly initiates a predefined Group
or Private Call, a Call Alert or a Quick Text message, or returns
the user to a preset channel.
Option Board Feature
–
Toggles option board features on or
off for option board-enabled channels.
PA On/Off
–
Toggles the radio’s internal public address (PA)
system on or off.
Permanent Monitor*
–
Monitors a selected channel for all radio
traffic until function is disabled.
Privacy
–
Toggles privacy on or off.
Radio Check
–
Determines if a radio is active in a system.
Radio Enable
–
Allows a target radio to be remotely
enabled.
Radio Disable
–
Allows a target radio to be remotely
disabled.
* Not applicable in Capacity Plus
NAG_6880309T15.book Page 4 Tuesday, March 9, 2010 11:47 AM