Deleting a nuisance channel, Restoring a nuisance channel, Advanced features – Motorola 4550 User Manual

Page 38

Advanced Features

English

Deleting a Nuisance Channel

If a channel continually generates unwanted calls or noise
(termed a “nuisance” channel), you can temporarily remove the
unwanted channel from the scan list.

This capability does not apply to the channel designated as the
Selected Channel.

Procedure:

When your radio “locks on to” an unwanted or nuisance
channel, press the programmed Nuisance Channel Delete
button until you hear a tone.

Release the Nuisance Channel Delete button. The
nuisance channel is deleted.

Deleting a “nuisance” channel is only possible through the
programmed Nuisance Channel Delete button. This feature is
not accessible through the menu.

Restoring a Nuisance Channel

Procedure:
To restore the deleted nuisance channel, do one of the
following:

•

Turn the radio off and then power it on again, OR

•

Stop and restart a scan via the programmed Scan button or
menu, OR

•

Change the channel via the Channel Rocker.

NAG_6880309T15.book Page 28 Tuesday, March 9, 2010 11:47 AM

This manual is related to the following products:

4580