Motorola 4550 - Manual (Page 55)

Advanced Features
English
45
4 P or Q to the required message and press N to
select.
A subject line may be shown if the message is from an
e-mail application.
5 The icon at the top right corner of the screen indicates the
status of the message (see Sent Item Icons on page 10).
Sending a Sent Text Message
You can select one of the following options while viewing a sent
text message:
• Resend
• Forward
• Edit
• Delete
NOTE: If the channel type (i.e. conventional digital or Capacity
Plus) is not a match, you can only edit, forward, or
delete a Sent message.
Procedure:
1 Press N again while viewing the message.
2 P or Q to Resend and press N to select.
3 The display shows Sending to: Alias or ID>, confirming that the same message is being
sent to the same target radio.
4 If the message is sent, a tone sounds and the display shows
Message Sent.
OR
If the message is not sent, a low tone sounds and the
display shows Message Send Failed.
If the text message fails to send, the radio returns you to the
Resend option screen. Press N to resend the message to the
same subscriber/group alias or ID.
NOTE: Changing the volume, and pressing any button, except
for N , P , or Q, returns you to the message.
The radio exits the Resend option screen if you press
the PTT button to initiate a Private or Group Call, or to
respond to a Group Call. It also exits the screen when
the radio receives a text or telemetry message, an
emergency call or alarm, or a call alert.
The display returns to the Resend option screen if you
press the PTT button to respond to a Private Call
(except if the radio is displaying the Missed Call
screen), and at the end of an All Call.
NAG_6880309T15.book Page 45 Tuesday, March 9, 2010 11:47 AM