Motorola LS3578 User Manual
Page 30
2 - 2
Symbol LS3578 Product Reference Guide
Short high-low beeps
Scanner has unpaired with the cradle.
Note: When connected to a remote device using SPP or HID, if a
disconnect beep sequence sounds immediately after scanning a
bar code, check the host device to determine if it received the
transmitted data. The scanner may have transmitted the last bar
code scanned after losing the connection.
Long low-long high beeps
Unsuccessful pairing attempt. See
Long low-long high-long low-long high
beeps
Remote device rejected connection attempt, possibly due to an
attempt to pair with a cradle that is already paired with the
maximum number of scanners.
Four long low beeps
1.
A transmission error was detected in a scanned symbol. The
data is ignored. This occurs if a unit is not properly configured.
Check option setting.
2.
When communicating with a cradle, the cradle acknowledges
receipt of data. If the acknowledgment is not received, this
transmission error beep sequence sounds. Data may still have
been received by the host. Check the host system for receipt of
transmitted data. If data was not received by the host, re-scan the
bar code.
Five high beeps
Emitted every 5 seconds while a reconnection attempt is in
progress. See
Auto-reconnect Feature on page 4-15
.
Parameter Menu Scanning
Short high beep
Correct entry scanned or correct menu sequence performed.
Long low-long high beeps
Input error; incorrect bar code, programming sequence, or Cancel
scanned. Scanner remains in program mode.
Short high-short low beeps
Keyboard parameter selected. Enter value using numeric bar
codes.
Short high-short low-short high-short low
beeps
Successful program exit with change in the parameter setting.
Long low-long high-long low-long high
beeps
Out of host parameter storage space. See
ADF Programming Normal Data Entry
High-low beeps
Enter another digit. Add leading zeros to the front if necessary.
Low-low beeps
Enter another alphabetic character or scan the End of Message
bar code.
High-high beeps
Enter another criterion or action, or scan the Save Rule bar code.
High-low-high-low beeps
Rule saved. Rule entry mode exited.
High-low-low beeps
All criteria or actions cleared for current rule, continue entering
rule.
Table 2-1
Standard Beeper Definitions (Continued)
Beeper Sequence
Indication