Muratec Printer/Copier/Scanner MFX-C3035 - Manual (Page 260)

Replacing Consumables 11-9
Replacing a Imaging Unit
When replacing a imaging unit, refer to the following table. For optimum print
quality and performance, use only approved imaging units for your specific
machine type. You can find your machine type and the imaging unit part num-
bers on the consumables reorder label inside the front cover your machine.
Note
Do not touch the OPC drum
surface. This could lower image
quality.
If the messages [Replace Imaging Unit] appear, replace the specified imaging
unit. As an example, the procedure for replacing the black imaging unit is
described below.
1
Check the message window to see which color imaging unit needs replac-
ing.