Multi-Tech Systems ISI5634PCI/4/8 User Manual
Page 80
80
ISI5634PCI/4/8 User Guide
I11
Display diagnostic information for the last modem con-
nection, such as DSP and firmware version, link type,
line speed, serial speed, type of error correction/data
compression, number of past retrains, etc.
Command: Nn
Modulation Handshake
Values:
n = 0 or 1
Default:
1
Description: N0
Modem performs handshake only at communication
standard specified by S37 and the B command.
N1
Modem begins handshake at communication standard
specified by S37 and the B command. During hand-
shake, fallback to a lower speed can occur.
Command: On
Return Online to Data Mode
Values:
0, 1, 3
Default:
None
Description: O0
Exit online command mode and return to data mode (see
+++AT
O1
Issue a retrain and return to online data mode.
O3
Issue a rate renegotiation and return to data mode.
Command: P
Pulse Dialing
Values:
P, T
Default:
T
Description:
Configures the modem for pulse (non-touch-tone)
dialing. Dialed digits are pulsed until a T command or
dial modifier is received.
Command: Qn
Result Codes Enable/Disable
Values:
n = 0 or 1
Default:
0
Description: Q0
Enable result codes.
Q1
Disable result codes.
Q2
Returns an OK for backward compatibility with some
software.