Multi-Tech Systems ISI5634PCI/4/8 - Manual (Page 64)

64
ISI5634PCI/4/8 User Guide
first port on the first card). Save the configuration for a particular port
using the 'save setup as' menu option as, for example, '1a' for the port /
dev/ttyM1a. To connect to the port /dev/ttyM1a using minicom the
next time, '
minicom 1a
' needs to be executed.
LINUX: TTY Devices Created by the Drivers:
Device files corresponding to ports on the ISI card are created in
the /dev folder. Use
ttyMxy
for normal ports and
cumxy
for
corresponding callout ports. Normal ports (
ttyM
) are configured for
dial-in connections. Callout ports (
cum
) are used for dial-out
connections.
In these expressions (
ttyMxy
and
cumxy
), the letter
x
is the
card number (1-4), and
y
is the port designator (a, b, c, ...).
The ISI Linux driver creates the following TTY devices in /dev
directory:
- /dev/ttyM1a TO /dev/ttyM1p
for the first ISI card
- /dev/ttyM2a TO /dev/ttyM2p
for the second ISI card
- /dev/ttyM3a TO /dev/ttyM3p
for the third ISI card
- /dev/ttyM4a TO /dev/ttyM4p
for the fourth ISI card
For the ISI5634PCI-4, it uses the following:
- /dev/ttyM1a TO /dev/ttyM1d
for the first card
- /dev/ttyM2a TO /dev/ttyM2d
for the second card
- /dev/ttyM3a TO /dev/ttyM3d
for the third card
- /dev/ttyM4a TO /dev/ttyM4d
for the fourth card
For the ISI5634PCI-8, it uses the following:
- /dev/ttyM1a
TO
/dev/ttyM1h
for the first card
- /dev/ttyM2a TO /dev/ttyM2h
for the second card
- /dev/ttyM3a TO /dev/ttyM3h
for the third card