Multi-Tech Systems ISI5634PCI/4/8 - Manual (Page 25)

25
Chapter 3—Software/Driver Installation
15. A completion screen will appear. It will indicate that the first
“MultiTech ISI Port” has been set up successfully.
Click Finish.
Notice that the auto-detection facility of Windows 2000 will repeat
the “ISI Port” installation sequence 3 more times for ISI5634PCI-4,
or 7 more times for ISI5634PCI-8. That is, the Found New Hardware
-- MultiTech ISI Port screen will appear many times after the ISI
driver has been located. On this screen, the messages “Found
New Hardware” and “Installing ...” will appear alternately.
Please understand that the repetition of these screen sequences is
normal and is not an error. It does not indicate any problem with
your PC, or with the MultiTech ISI card, or its driver software.
16. Driver installation for the ISI5634PCI card is complete.