Setting up the printer port, Selecting a graphics printer, Setting the date and time – Microtest TSB-67 - 568A Annex E User Manual
Page 50
The Language and Date Style fields are preprogrammed. Neither of these fields can be changed.
Press
Change (F2)
to toggle the Units setting between feet and meters.
After editing, press
Save (F1)
to store the new Units setting and exit or press the
ESCAPE
key to
exit without saving.
Setting Up the Printer Port
To display the
PRINTER PORT SETUP
screen, press the
Extended Functions
key,
select User
Preferences
(if you have a
PentaScanner+
), then select
Printer Port
. This screen lets you
configure serial printer port settings.
Press the
Ò
or
Ñ
arrow key to highlight a setting to modify — Baud rate or Handshaking.
The default settings for Baud rate and Handshaking are 9600 and XON/XOFF. The settings for
Data Bits, Stop Bits and Parity are fixed at 8, 1 and None. Their values cannot be changed.
After highlighting the Baud rate or Handshaking setting, press
Change (F2)
to toggle through the
available settings.
Press
Printer (F3)
to display the graphics printer screen.
Press
Save (F1)
to store the new settings and exit or press the
ESCAPE
key to exit without saving.
See Chapter 4: Editing, Printing & Updating for more information on printing and
downloading.
Selecting a Graphics Printer
To display the
GRAPHICS PRINTER
screen, press the
Extended Functions
key,
select User
Preferences
(if you have a
PentaScanner+
), then select
Printer Port
, then press
Printer (F3).
This screen lets you specify the type of printer used for printing NEXT and Attenuation graphs.
Press
Change (F2)
to toggle through the available printer settings.
Press
Save (F1)
to store the new settings and exit or press the
ESCAPE
key to exit without saving.
Setting the Date and Time
To display the
DATE/TIME SETUP
screen, press the
Extended Functions
key,
select User
Preferences
(if you have a
PentaScanner+
), then select
Date/Time
.
Press the
Ñ
or
Ò
or
Ï
or
Ð
arrow key to select the portion of the date or time field to
change. The selected portion of the field will be enclosed in a box.
Press
Change (F2)
to toggle through the available date and time settings.
After editing press
Save (F1)
to store the new date and time settings and exit or press the
ESCAPE
key to exit.