Mercedes-Benz 2006 CL 500 - Manual (Page 77)

76
Safety and Security
Occupant safety
Installation of infant and child restraint
systems
This vehicle is equipped with tether an-
chorages for a top tether strap at each of
the rear seating positions.
1 Cover of top anchorage ring
̈ Remove cover 1 from anchorage ring.
̈ Store cover 1 in a convenient place
(e.g. glove box).
̈ Guide tether strap between head re-
straint and top of seat back.
Head restraint must be positioned such
that the top tether strap can pass freely
between the head restraint and the top of
seat back.
̈ Make sure the tether strap is not
twisted.
2 Hook
3 Anchorage ring
̈ Securely fasten hook 2, which is part
of the tether strap, to anchorage
ring
3.
Once the top tether anchorage hook is at-
tached, the child restraint itself can be se-
cured. Tighten the top tether strap
according to the child restraint
manufacturer’s instructions.
̈ Reinstall cover after removing the teth-
er strap.
i
For safety, make sure the hook 2 has
attached to the ring 3 beyond the
safety catch, as illustrated.