Mercedes-Benz 2006 CL 500 - Manual (Page 419)

418
Technical data
Fuels, coolants, lubricants, etc.
Capacities Vehicle components and their respective
lubricants must match. Therefore use only
products tested and approved by
Mercedes-Benz. Please refer to the Factory Approved
Service Products pamphlet, or inquire at
your Mercedes-Benz Center.
Model Capacity Fuels, coolants, lubricants, etc.
Engine with oil filter CL 500
CL 55 AMG
CL 600
CL 65 AMG 8.5 US qt (8.0 l)
8.0 US qt (7.5 l)
9.5 US qt (9.0 l)
11.0 US qt (10.5 l) Approved engine oils
Automatic transmission CL 500
CL 55 AMG
CL 600
CL 65 AMG 9.1 US qt (8.6 l)
9.1 US qt (8.6 l)
8.2 US qt (7.7 l)
8.2 US qt (7.7 l) MB Automatic Transmission Fluid
Rear axle CL 500
CL 55 AMG
CL 600
CL 65 AMG 1.7 US qt (1.6 l)
2.1 US qt (2.0 l)
2.1 US qt (2.0 l)
2.1 US qt (2.0 l) Hypoid gear oil SAE 85 W 90
Hydraulic system for ABC approx. 4.2 US qt (4.0 l) MB Hydraulic Fluid
Power steering approx. 1.1 US qt (1.0 l) MB Power Steering Fluid
(Pentosin CHF 11S)
Front wheel hubs approx. 3.5 oz (100 g) each High temperature roller bearing grease
Brake system 0.7 US qt (0.7 l) MB Brake Fluid (DOT 4+)