Moxa Technologies Moxa EtherDevice Switch EDS-405A - Manual (Page 77)

EDS-408A/405A Series User’s Manual EDS Configurator GUI
4-6
Import Configuration
The Import Configuration function is used to import an entire configuration from a text file to
the EDS. This utility can be used to transfer the configuration from one EDS to another, by first
using the Export Configuration function (described in the previous section) to save a switch
configuration to a file, and then using the Import Configuration function. Do the following to
import a configuration:
1. Highlight the server (from the Moxa EtherDevice Switch list in the Configurator window’s
left pane), and then click the Import toolbar icon , or select Import Configuration from
the Configuration menu.
2. Click Open to navigate to the text file that contains the desired configuration. Once the file is
selected, click Open again to initiate the import procedure.
3. The Setup Configuration window will be displayed, with a special note attached at the lower
portion of the window. Parameters that have been changed will be activated with a checkmark.
You may make more changes if necessary, and then click OK to accept the changes.