Moxa Technologies Moxa EtherDevice Switch EDS-405A - Manual (Page 22)

EDS-408A/405A Series User’s Manual Featured Functions
3-7
Auto IP Configuration
Setting Descriptions Factory Default
Disable Set up the EDS’s IP address manually.
By DHCP
The EDS’s IP address will be assigned
automatically by the network’s DHCP
server.
By BootP
The EDS’s IP address will be assigned
automatically by the network’s BootP
server.
Disable
Switch IP Address
Setting Descriptions Factory Default
IP Address of the
EDS
Identifies the EDS on a TCP/IP network. 192.168.127.253
Switch Subnet Mask
Setting Descriptions Factory Default
Subnet mask of
the EDS
Identifies the type of network the EDS is
connected to (e.g., 255.255.0.0 for a Class
B network, or 255.255.255.0 for a Class
C network).
255.255.255.0
Default Gateway
Setting Descriptions Factory Default
Default Gateway
of the EDS The IP address of the router that connects
the LAN to an outside network.
None
DNS IP Address
Setting Descriptions Factory Default
1st DNS Server’s
IP Address The IP address of the DNS Server used by
your network. After entering the DNS
Server’s IP address, you can input the
EDS’s URL (e.g.,
www.eds.company.com ) in your
browser’s address field, instead of
entering the IP address.
None
2nd DNS
Server’s
IP Address The IP address of the DNS Server used by
your network. The EDS will try to locate
the 2nd DNS Server if the 1st DNS Server
fails to connect.
None