beautypg.com

Modify ip address – Moxa Technologies Moxa EtherDevice Switch EDS-405A User Manual

Page 75

background image

EDS-408A/405A Series User’s Manual

EDS Configurator GUI

4-4

4. Click Open to navigate to the folder that contains the firmware upgrade file, and then click

the correct “*.rom” file (eds.rom in the example shown below) to select the file. Click Open
to activate the upgrade process.

Modify IP Address

You may use the Modify IP Address function to reconfigure the EDS’s network settings. Start by
clicking the Modify IP address icon

, or by selecting Modify IP address from the

Configuration menu.

The Setup Configuration window will open. Select the box to the left of those items that you
wish to modify, and then Disable or Enable DHCP, and enter the IP Address, Netmask, Gateway,
and DNS IP. Click OK to accept the changes to the configuration.










This manual is related to the following products: