Configuring set device ip, Using diagnosis, Mirror port – Moxa Technologies Moxa EtherDevice Switch EDS-405A User Manual
Page 66: Configuring set device ip -51, Mirror port -51
EDS-408A/405A Series User’s Manual
Featured Functions
3-51
STEP 3
Be sure to activate your settings before exiting.
• When using the Web Browser interface, activate by clicking the Activate button.
• When using the Console utility, activate by first highlighting the Activate menu option, and
then press Enter. You should receive the Set device IP settings are now active! (Press any
key to continue) message.
Configuring Set Device IP
NOTE: The user interface for EDS-408A shows 8 ports.
Desired IP Address
Setting
Description
Factory Default
IP Address
Set the desired IP of connected devices.
None
Using Diagnosis
The EDS provides two important tools for administrators to diagnose network systems.
Mirror Port
The Mirror port function can be used to monitor data being transmitted through a specific port.
This is done by setting up another port (the mirror port) to receive the same data being transmitted
from, or both to and from, the port under observation. This allows the network administrator to
“sniff” the observed port and thus keep tabs on network activity.