Chapter 3 featured functions, Chapter 3, Featured functions -1 – Moxa Technologies Moxa EtherDevice Switch EDS-405A User Manual
Page 16
3
3
Chapter 3
Featured Functions
This chapter explains how to access a Moxa EtherDevice Switch’s various configuration,
monitoring, and administration functions. There are three ways to access these functions: serial
console, Telnet console, and web browser. The serial console connection method, which requires
using a short serial cable to connect the EDS to a PC’s COM port, can be used if you do not know
the EDS’s IP address. The Telnet console and web browser connection methods can be used to
access the EDS over an Ethernet LAN, or over the Internet.
The Web Console is the most user-friendly way to configure your EDS. In this chapter, we use the
Web Console interface to introduce the EDS’s functions. There are only a few differences between
the Web Console, Serial Console, and Telnet Console access methods.
The following topics are covered in this chapter:
Configuring Basic Settings
Configuring SNMP
Using Communication Redundancy
Using Traffic Prioritization
Using Virtual LANs
Using Rate Limiting
Using Auto Warning
Using Line-Swap-Fast-Recovery
Using Set Device IP
Using Diagnosis
Using the Monitor
Using the MAC Address Table
Using Event Log
Using Syslog