Setting up, Setting the time and date – Motorola CP1250 User Manual
Page 3
7
Setting the Time and Date
On the Function menu, press
v
or
s
to move to
i
(
SET TIME/ALARM
).
Press
t
. The Set Time screen is displayed.
Press
s
to move to the hour field.
Press
x
or
w
to adjust the hour.
Press
s
to move to the first digit of the minutes field.
Press
x
or
w
to adjust the first digit of the minutes.
Repeat Steps 5 and 6 to adjust the second digit of the minutes field, the
method of time measurement (
-
,
"
or
|
), month, date, and year fields.
Press
t
to accept the time and date changes.
Pager status
Set Time
fields
H Y
L
›
):))
S )!/)!
H_ 00:00|
01/01/00
H
J 00:00| --/--/--
SET TIME
Set Time Screen example
SETTING
UP
8
Setting the Pager Alert Mode
The alert can be set as either audible or silent.
On the Function menu, press
v
until one of two possible prompts is
displayed:
SET SILENT ALERT
([
k
] to change from audible to silent alert mode) or
SET AUDIBLE ALERT
([
f] to change from silent to audible alert mode).
Press
t
to accept the new alert mode. The pager emits a sample of the new
alert.
Setting the Pager Alert Pattern
The pager must be set for an audible alert to select an alert pattern. There are
ten alert pattern options: one standard alert (
1
), seven different pleasing alerts
(
2
through
8
), a chirp alert (
O
), and no alert (
k
).
On the Function menu, press
s
to move to
e
(
CHOOSE ALERT
).
Press
t
. The Alert pattern screen is displayed.
1
2
3
4
5
6
7
8
O
k
STANDARD ALERT
Alert Pattern Screen example
SETTING
UP
9
Press
v
or
s
to move to the desired alert. A sample of each alert is emitted
as you scroll through the selections.
Press
t
to accept the selected alert. The pager emits the selected alert (for
any selection except
k
) as it returns to the Status screen.
Setting the Pager Alarm
You can set two clock-type alarms:
• One-time only—Specify the time and date.
• Daily—Specify the time only. The alarm expires daily at the same time.
On the Function menu, press
s
to move to
i
(SET TIME/ALARM).
Press
t
. The Set Time screen is displayed.
Press
w
or
x
. The Set Alarm screen is displayed.
Press
s
. The alarm indicator (
J
) flashes.
Pager status
Set Alarm
fields
H Y
L
›
!@:)%
m )%/)!
_ 12:05" 05/01/00
HJ 12:00- --/--/--H
SET ALARM
Set Alarm Screen example
SETTING
UP
10
Press
w
to change the indicator from
J
(alarm off) to
r
(alarm on).
Press
s
to move to the hour field.
Press
x
or
w
to adjust the hour.
Repeat Steps 6 and 7 until you have set both digits of the minutes field and
the method of time measurement (
AM
,
PM
, or
|
) field. If this is a one-time
only alarm, also use Steps 6 and 7 to set the month, date, and year fields. If
this is a daily alarm, leave the dashes (
--
) in the date fields and go to the
next step.
Note: Only
AM
or
PM
can be changed. If you are using the
|
time
measurement, you cannot change it here.
Press
t
to accept the alarm setting.
In the upper-left corner of the pager,
R
is displayed, indicating the alarm is set.
When the alarm expires,
R
flashes and the pager either vibrates or emits an
audible alert until you press a button. If it is a one-time alarm,
R
disappears
from the Status screen after you press a button.
SETTING
UP