Motorola iDEN - Manual (Page 36)

28
i2000 UserÕs Guide
Changing Your Call Barring Passcode
To change your call barring passcode:
1. From the Phone Ready screen, press until you see the
ÒPrgmÓ menu option.
The time, date, and menu option, ÒLine2Ó, do not appear in GSM.
2. Press , . The Ò48=Change Bar
PasscodeÓ screen displays.
3. Select ÒOKÓ. The ÒOld Code?Ó screen
displays.
4. Enter your current passcode then select
ÒOKÓ. The ÒNew Code?Ó screen
displays.
5. Enter your new passcode then select ÒOKÓ.
6. At the ÒRepeat CodeÓ screen, enter your new passcode again then
select ÒOKÓ.
Be sure to record your new passcode and store it in a safe place.
Alternate Phone Line (iDEN Only)
If your phone is activated with two phone lines, you can switch between
them. To change phone lines, your phone must be at the Phone Ready
screen. The following settings are independent for each phone line.
When you enable a setting, it applies only to the active line.
¥ Ringer Volume
¥ Auto Answer
¥ One-minute Beep
¥ Automatic Display Timer
¥ Resettable Timer
¥ Total Call Timer
¥ Selectable Ring Styles
¥ Call Forwarding
Setting the Active Line
At the ÒPhone ReadyÓ screen:
1. Press until you see ÒLine2Ó. (If
you are on Line 2, you will see ÒLine1Ó.)
2. Do one of the following:
¥ Select ÒLine2Ó to activate Line 2 when Line 1 is the active
line.
48=Change
Bar Passcode
Exit OK
Phone Ready
(System Name)
Line2
11:48p 08/21