Motorola iDEN - Manual (Page 13)

5
Getting Started
Charging and Attaching the Battery
Remove the battery from the protective case provided in the original
packaging. When the battery is not attached to the phone or being
charged, store it in this case.
Charging the Battery
Attach the charger connector to the i 2000 phone, then ßip open the
prongs and plug the charger into an electrical outlet. For more
information about chargers, see ÒTravel ChargerÓ on page 57,
ÒVehicular Battery ChargerÓ on page 58, and ÒDesktop Dual-Pocket
ChargerÓ on page 59.
Attaching the Battery
To attach the battery to your i 2000
phone, align the battery as shown. Press
down on the battery until you hear a
click.
Battery and Charging Status
A low battery is indicated by a short,
chirp-like sound through the speaker.
The battery strength icon shows the
remaining charge in the battery. Three
bars indicate full charge. When you
have less than Þve minutes of talk time
remaining, the indicator ßashes.
Figure 1. Battery Charging Status
Detaching the Battery
To detach the battery, press the latch to release the battery and pull out
the battery.
N O T E Before you use the battery for the Þrst time, charge it
for at least three hours.
Icon
Flashes
Charging Low Battery 0-30% 31-60% 61-90% 91-100%
Discharging Low Battery 0-10% 11-40% 41-70% 71-100%
N O T E Before removing the battery, make sure the phone is
turned Off.
Latch