MITSUBISHI ELECTRIC DX-TL1600EM - Manual (Page 29)

29
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
ENGLISH
3. Turn the JOG dial until the cursor is next to ARCHIVE POINT
RESET and turn the SHUTTLE ring to the right.
• The sub-item will start flashing.
4. Turn the JOG dial until “ON” flashes.
POWER FAILURE
@ARCHIVE POINT RESET ON
MENU INITIALIZE OFF
IM-CHECK MODE OFF
5. When the message, “TURN THE SHUTTLE RING >> TO
EXECUTE.” is shown on the screen, turn the SHUTTLE ring
to the right.
• The Archive Pointer is now reset.
• If not executing, turn the JOG dial until “OFF” is shown.
POWER FAILURE
@ARCHIVE POINT RESET ON
MENU INITIALIZE OFF
IM-CHECK MODE OFF
TURN THE SHTTLE RING
>> TO EXECUTE.
6. Turn the SHUTTLE ring to the left or press the SET UP
button.
♦ Initializing menus
Selecting “ON” of MENU INITIALIZE in the
menu initializes the setting ,except for the built-in HDD
and the peripheral recording device.
Example: Setting MENU INITIALIZE to “ON” (the default
is “OFF”).
1. Press the SET UP button to display the
2. Move the cursor next to SERVICE then turn the SHUTTLE
ring to the right.
• The menu appears.
3. Turn the JOG dial until the cursor is next to MENU
INITIALIZE and turn the SHUTTLE ring to the left to show
“ON”.
POWER FAILURE
ARCHIVE POINT RESET OFF
@MENU INITIALIZE ON
IM-CHECK MODE OFF
4. When “PUSH WARNING RESET KEY THEN ALL MENU
WILL BE INITIALIZED.” appears on the screen, press the
WARNING RESET button.
POWER FAILURE
ARCHIVE POINT RESET OFF
@MENU INITIALIZE ON
IM-CHECK MODE OFF
PUSH WARNING RESET KEYŁ
THEN ALL MENU
WILL BE INITIALIZED.
• If not executing, change the sub-item to “OFF” and turn
the SHUTTLE ring to the right.
5. SPLIT 16 screen will be shown on the monitor and all menus
are initialized.
Q W
T Y U I
O
E R
P { }
q w e r
06-09-2000 12:12:05
• Please note that time date display, timer program setting,
the title of all cameras set in CAMERA TITLE of the DISPLAY> menu are not initialized.
• The SELECTED PATTERN setting will be initialized to P1 of
TIMER PROGRAM on the
♦ IM-CHECK MODE setting
This function is designed to confirm whether alterations
have been made to the data recorded by the unit.
Example: Setting IM-CHECK MODE to “ON” (the default is
“OFF”).
1. Press the SET UP button to display the
2. Move the cursor next to SERVICE then turn the SHUTTLE
ring to the right.
• The menu appears.
3. Turn the JOG dial until the cursor is next to IM-CHECK
MODE and turn the SHUTTLE ring to the right.
• The sub-item will start flashing.
4. Turn the JOG dial until “ON” flashes.
POWER FAILURE
ARCHIVE POINT RESET OFF
MENU INITIALIZE OFF
@IM-CHECK MODE ON
5. Turn the SHUTTLE ring to the left or press the SET UP
button.
INFORMATION
To distinguish alterations to recorded data:
• Use the PLAY DEVICE button to select the device
that is to be inspected for alterations.
• Press the PLAY button to begin playback of re-
corded data.
• If an alteration is detected on part of the data during
playback, “
■ ” will appear to the right of the “A” (Alarm
Recording number) in the Time Display. “ ■ ” indi-
cates the CAMERA channel of the altered data.
28-10-2001 SUN A
00:00:00 25F 50 % C16
WARNING: MODIFIED IMAGE
(QWERTYUIOP{}qwer
)
• The displayed “ ■ ” and the WARNING display can
be cleared by pressing the WARNING RESET but-
ton.
• This function does not work with the communica-
tion function.
If you don’t use this function, please select the
sub-item “OFF”.