Monessen Hearth CSDV40SLP - Manual (Page 11)

58D6056
11
CSDV Series Direct Vent Gas Stove VENTING INSTALLATION
W
ARNING
Read all instructions completely and thoroughly before attempting
installation. Failure to do so could result in serious injury, property damage
or loss of life. Operation of improperly installed and maintained venting
system could result in serious injury, property damage or loss of life.
W
ARNING
Failure to follow these instructions will
void the warranty.
INSTALLATION pRECAUTIONS
Consult local building codes before beginning the installation. The installer must make sure to
select the proper vent system for installation. Before installing vent kit, the installer must read
this stove manual and vent kit instructions.
Only a qualified installer/service person should install venting system. The installer must follow
these safety rules:
• Wear gloves and safety glasses for protection.
• Use extreme caution when using ladders or when on rooftops.
• Be aware of electrical wiring locations in walls and ceilings.
The following actions will void the warranty on your venting system:
• Installation of any damaged venting component.
• Unauthorized modification of the venting system.
• Installation of any component part not manufactured or approved by MHSC.
• Installation other than permitted by these instructions.
W
ARNING
This stove must be vented to the outside.
The venting system must NEVER be attached
to a chimney serving a separate solid fuel
burning appliance. Each gas appliance must
use a separate vent system. Do not use
common vent systems.
W
ARNING
Horizontal sections of this vent system
require a minimum clearance of 2" from
the top of the pipe and 1" minimum to the
sides and bottom. Vertical sections of this
system require a minimum of 1" clearance
to combustible materials on all sides of
the pipe. Only a 1" clearance is required
where the vent passes through the nearest
vertical wall.