Muratec MFX-1500 - Manual (Page 78)

Beyond the basics
2.30
2. To change the setting, press PROGRAM .
The “On” setting activates automatic printing of a confirmation report, and the
“Off” setting disable this printing, for only the next transmission.
3. When the setting is as you want it, press ENTER .
Following the next transmission, your fax machine will return to the setting you
specified previously (in step 5 on previous page).
Polling
Polling allows someone to fax a document to you without the other person having to
make (and pay for) the call. Your machine can perform:
•
Regular polling — Retrieves a document from the remote fax machine.
•
Database polling, Muratec-proprietary— (Possible only in communication with
certain memory-equipped Muratec or Murata fax machines). Retrieves a
document stored as a file in the remote fax machine’s memory. Great for getting
work assignments, updated price lists, contest standings and other frequently
updated documents.
• Continuous polling — Retrieves continuously a document from any remote fax
machine for the designated time. For example, a hospital pharmacy can use this to
check on orders waiting in other faxes in the hospital.
•
Database polling using ITU - T -standard sub-addressing — This allows you to
perform database polling in communication with not only other Muratec (or
compatible) fax machines, but also other makers’ machines.
How to use the
ITU - T sub-address, see “F-Code communication” (pages 2.50–
2.60).
Regular polling
To perform regular polling of a document from any remote fax machine:
1. Make sure that the polling document is actually set in the remote machine.
2. Press COMMUNICATION OPTIONS four times and then press ENTER twice. The
display will show:
Enter Fax Number
_
3. Enter the remote machine’s number by either pressing a one-touch key,
entering a speed-dial number or just dialling the number normally through the
numeric keypad.
To perform regular polling now, skip to step 7.
To perform delayed regular polling, proceed to step 4.
4. Press COMMUNICATION OPTIONS , ENTER . The display will show:
Delayed
Enter Time: 15/17:05
5. Use the numeric keypad to enter the date and time when your machine should
perform the delayed regular polling.
6. Press ENTER .
7. Press START .
When it performs the polling command, your machine will dial the number and, upon
making contact with the other machine, begin receiving the document as if the other
machine had placed the call.
Database polling
To poll a document from a remote fax machine’s memory:
1. Make sure that:
•
The remote fax machine is a memory-equipped Muratec or Murata fax
machine which has a file stored in its memory, ready for polling.
• You know the one- or two-digit database file number of each file you wish
to poll from the remote machine.
2. Press COMMUNICATION OPTIONS four times and ENTER once. The display will
show:
Polling
File No. _
3. Enter the database file number for the document you wish to poll. You can
enter as many as 10 file numbers in one operation. To enter more than one (as
in this example), press
COMMUNICATION OPTIONS between each to insert a
comma — but do not insert a comma after the last file number.
Polling
File No. 5,26,84
4. Press ENTER . The display will show:
Enter Fax Number
_