Manitowoc Ice Q290 - Manual (Page 20)

Installation Section 3
Installation Procedures (continued)
18. Clean and sanitize all equipment. Follow
cleaning and sanitizing instructions in section 4.
19. QPA310/330/34 ONLY - If you have a top-
mounted ice machine, adjust the ice machine
according to the instructions provided with the
ice machine.
20. Install ice baffle inside the ice maker
compartment. Follow installation instructions
supplied with ice baffle.
21. Install foam gasket on the bottom of the front
panel.
22. Fill the dispenser bin one quarter full of ice or
start the ice machine, allowing the ice machine to
drop at least three complete batches of ice.
23. Test the ice dispensing action of the dispenser
__________________________________________________________________________________________
Post-Installation Check List
1. Dispenser and ice machine are level.
2. Drains are vented.
3. Dispenser does not sit in direct sunlight.
4. Dispenser does not sit in direct airflow from a
heating duct.
5. Bin and ice machine drains are separate.
6. Ice dispenses properly.
7. Installation is clean and neat.
8. Dispenser is accessible for servicing.
9. The warranty card was returned.
10. Owner was instructed on the operation of the
dispenser.
11. Owner knows how to clean and sanitize the
dispenser.
12. Owner knows how often to clean and sanitize the
dispenser.
13. Owner has your telephone number to call for
follow-up service on the dispenser.
14. You have placed one of your service stickers on
the dispenser for follow-up service.
3-4