Manitowoc Ice Q290 - Manual (Page 12)

1-6
General Information Section 1
Adjusting the Coin Mechanism for Canadian Coins
Important
Canadian quarters are magnetic. Therefore the
magnet inside the coin mechanism must be
removed so Canadian quarters will drop through
the coin mechanism.
1. Remove the front panel of the dispenser. The
coin mechanism can be changed while in place in
the dispenser door, as shown above.
2. Pivot the coin magnet housing section away from
the rest of the coin mechanism.
3. Using a small screwdriver, loosen the set screw
which holds an aluminum plate in the coin
magnet housing.
4. Remove the aluminum plate.
5. Using a metal screwdriver tip, pull out the magnet
from the magnet housing. (The backside of the
magnet has the stronger magnetic attraction.)
6. The aluminum plate and magnet have now been
removed from the coin magnet housing. Pivot the
empty coin magnet housing section back into
place.
7. Reinstall the front door of the dispenser.