Manitowoc Ice Q290 - Manual (Page 19)

Section 3
Installation
With Top-Mounted Ice Machines
Installation Procedures
WARNING
Do not attempt to move a dispenser without first
removing the ice machine. The combination can be
unstable and could tip, causing serious injury.
1. Review the installation Check List on pages 3-1 and
3-2. Make sure all utility and space requirements
are present at the installation site.
2. Remove the carton top from the dispenser.
3. Remove the legs and other accessories from inside
the dispenser bin.
4. Remove the carton from the sides of the dispenser.
5. Remove the dispenser from the shipping pallet.
6. Flatten the shipping carton.
7. Lay the dispenser on it back on the carton.
8. Thread the legs into the bottom of the dispenser.
9. Set the dispenser upright.
10. Place the dispenser in the desired location.
11. Make sure the dispenser bin top is level. A level
bin is important for proper operation of the ice
machine.
12. Place the ice machine on top of the dispenser at this
time.
13. Connect the drain of the dispenser to the floor drain.
Vent the drain at the back of the dispenser to
reduce buildup of algae and improve drainage.
14. Follow local plumbing codes for drain installation.
15. If the dispenser has a water valve, connect your
water line to the water connection at the back of
the dispenser.
16. Test all drain and water lines for leaks.
17. Plug the dispenser into the proper electrical outlet.
3-3