MicroNet Technology SP3367N - Manual (Page 9)

Chapter 2 Physical Description
2.1 Back Panel
Parameter Description
Antenna
Connector
The antenna connector of the router is reverse SMA
connector. It allows you to connecting an external
antenna with reverse SMA connector to the router
easily.
Reset
Press and hold button for 5 seconds to
clear all settings.
Power
Jack
Please plug the power adapter attached with the
ADSL Router to the power jack. The power adapter
is 12VDC, 1A.
WPS
Wi-Fi Protected Setup (WPS) is the simplest way to
build connection between wireless network clients
and this ADSL router. Press this button on the router
and enable WPS function of the wireless clients, the
router and clients will automatically configure the
security key and connect directly. Please note that
the router will wait for WPS requests from wireless
clients in 2 minutes after the WPS button is pressed.
LAN
The Broadband router’s 4 LAN ports are where
users can connect LAN’s PCs, printer servers, hubs
and switches etc.
ADSL
Connect the supplied RJ-11 telephone line to this
port and your ADSL/telephone network.
6