MicroNet Technology SP3367N - Manual (Page 14)

b) Windows 2000
1. Click the button and select , then click .
The Control Panel window will appear.
2. Double-click icon. In the Network and
Dial-up Connection window, double-click on icon.
The Local Area Connection window will appear.
3. In the Local Area Connection window, click the button.
4. Check the list of Network Components. Users should see Internet Protocol
[TCP/IP] on the list. Select it and click the button.
5. In the Internet Protocol (TCP/IP) Properties window, select
address automatically> and as
shown on the following screen.
6. Click to confirm the setting. The PC will now obtain an IP address
automatically from the Broadband Router’s DHCP server.
7. Please make sure that the Broadband router’s DHCP server is the only DHCP
server available on the LAN network.
8. Proceed to Web-based User Interface once IP address is correctly configured.
c) Windows XP
1. Click the button and select , then click
Connections>. The Network connections window will appear.
11