MicroNet Technology SP3367N - Manual (Page 38)

Parameter Description
Virtual Server for
Show the Virtual Server setting is for single or multiple IP
Addresses.
Rule Index Choose the rule number.
Application
Select the application of the virtual server, for example: FTP
or HTTP Server. When the application is selected, the port
number for the application will be assigned automatically.
Start Port Number Enter the start port number.
End Port Number Enter the end port number.
Local IP Address
It is recommended to enter a static IP Address for the server
here. If the server’s IP Address is obtained from DHCP
Server, the IP Address may be changed dynamically and will
cause problem in the feature. Please assign a static IP
Address to the server and make sure that the IP Address is
not in the range of IP Addresses that the DHCP Server will
assign.
35