Magellan RoadMate 700 - Manual (Page 53)

User Options 47
Configuring the Magellan RoadMate
The configuration options let you customise the Magellan RoadMate to your individual settings. All
settings are set for each individual user.
Remember that you must NOT customise your settings while you are driving. If you are operating the
vehicle, please bring it to a complete standstill BEFORE you configure your Magellan RoadMate.
From any screen press the Option button. Select "Configuration"
and press Enter.
Use the 8-way arrow keypad to select the configuration option you
want and press Enter.
The available configuration options are:
Map Options Set the scrolling map, the Split TrueView mode, the heading of the map and the
unit of measurement used.
Select Map Colour Select the map display from nine colour themes. .
Route Preferences Set your preferences for the calculation of your route and switch automatic re-
routing on or off.
Voice Options Choose between a Male or Female voice for the guidance instructions.
Colour Options Select from four colour themes.
Contrast Set display contrast level.
Brightness Set display brightness level.
Display Options Set automatic brightness and contrast.
Tone Options Select tone used for alerts before a change of direction.
Language Select language for the displays and voice guidance.
Diagnostics Perform selected diagnostic tests on the Magellan RoadMate and switch the
simulator mode on or off.
User - Edit Name Enter or edit name of the currently selected user.
POI Selection Select the Points of Interest you want to display on the map.