Gateway 8400 - Manual (Page 13)

8 Installation
Installing the system drawer side rails
Before installing the server (system drawer) in the cabinet, you need to install
the system drawer side rails on the server.
To install the system drawer side rails:
1 Remove the system drawer side rails from the cabinet mounting rails by
depressing the retention clips on the inside of the system drawer side
rails, then sliding the rails off.
2 Mount the system drawer side rail on the server using 4 screws from the
accessory kit. Make sure the retention clips are at the back of the server.
3 Mount the second rail on the opposite side of the server.
Retention clip
Guide rail Retention clip