beautypg.com

Vcr setup s-vhs playback – GoVideo DV3130 User Manual

Page 53

background image

53

If you want your videotapes to play automatically when you insert
them, turn on Auto Play.

NOTE:

Only tapes that are missing the Record Safety Tab will
play automatically when inserted.

1

Open “Initial Setup” menu

With the VCR in Stop or Play mode, press the SETUP button.

2

Select “VCR”

Use the

/

buttons to highlight “VCR”, then press ENTER to

select.

3

Select “Auto Play”

Use the

/

buttons to highlight “Auto Play”, then press the

button to select from the following options:

• On - The VCR will automatically begin playing a videotape

when it is inserted, as long as the record safety tab has
been removed.

• Off - Auto Play is disabled.

4

Select “Auto Repeat”

Use the

/

buttons to highlight “Auto Repeat”, then press

the

button to select. Choose “On” if you want the VCR to

play tapes repeatedly (unless a playback control button is pressed,
such as STOP, FF or REW).

5

Select “Commercial Advance”

See page 61-62.

VCR Setup

S-VHS Playback

The DVD+VCR allows you to playback high quality S-VHS tapes.

1

Insert a S-VHS Tape

Insert an S-VHS tape into the VCR deck.

2

Start Playback

Press PLAY/PAUSE on the remote control to begin playback of the S-VHS tape.

Auto Play :

On

Auto Repeat :

Off

Commercial Advance

Auto Play

: On

Auto Repeat

: Off

Commercial Advance

Off
On

On
Off