Changing speed ranges – Grizzly G0632 User Manual

Page 27

G0632 16" x 42" Variable Speed Wood Lathe

-25-

Changing Speed

Ranges

The Model G0632 has two speed ranges: 1) the
low range from 0 to 1200 RPM which provides a
greater torque, and 2) the high range from 0 to
3200 RPM.

Refer to the speed recommendations chart (see

Figure 28) to choose the appropriate RPM for
your operation. Then choose the speed range that
will include the selected RPM.

3. Use the included 8mm hex wrench to loosen

the motor mount cap screw just under the
motor tensioning handle (see

Figure 30).

Changing Speed Ranges

Figure 29. Belt access panel removed.

Figure 30. Motor tensioning handle and motor

mount cap screw.

Motor Mount

Cap Screw

Motor Tensioning

Handle

Diameter

of Work-

piece

Roughing

RPM

General

Cutting

RPM

Finishing

RPM

Under 2"

1520

3200

2–4"

760

1600

2480

4–6"

510

1080

1650

6–8"

380

810

1240

8–10"

300

650

1000

10–12"

255

540

830

12–14"

220

460

710

14–16"

190

400

620

Figure 28. Model G0632 speed

recommendations.

2. Remove the front belt access panel (see

Figure 29).

To change speed ranges:

1. DISCONNECT THE LATHE FROM THE

POWER SOURCE!