GarrettCom Magnum 3000 - Manual (Page 12)

Magnum 3000 Stackable Hubs Installation and User Guide (07/06)
5
www GarrettCom com . .
2.0 Introduction - Magnum 3012 and 3024 Stackable Hubs
This section describes the features and capabilities of the Magnum 3012 and
3024 Stackable Hubs, including bonus ports, applications, installation, and
operation.
2.1 Inspecting the Package and Product
Examine the shipping container for obvious damage prior to installing this
product; notify the carrier of any damage which you believe occurred during shipment or
delivery. Inspect the contents of this package for any signs of damage and ensure that
the items listed below are included.
This package should contain:
1 - Magnum 3012 or Magnum 3024 Base Unit
1 - AC Power Cord (U.S. and other 115 vac only)
1 - Set of metal "Ears" for optional rack mounting
1 - Inter-Repeater Bus (IRB) ribbon cable with connectors
1 - Installation and User Guide
1 - Product Registration Card
Remove the items from the shipping container. Be sure to keep the shipping
container should the unit need to be re-shipped at a later date. To validate the product
warranty, please complete and return the enclosed Product Registration Card to
GarrettCom as soon as possible.
In the event there are items missing or damaged, contact the party from whom
you purchased the product. If the unit needs to be returned, please use the original
shipping container if possible. Refer to Section 6, Troubleshooting, for specific return
procedures.
Caution: Be sure to see Section 2.3.2 about switch settings before installing with
3000 units in a managed Magnum 3000 stack.