Cd/vcd setting, 1 from stop mode, press setup, 2 select audio and press enter – GoVideo DVP1100 User Manual

Page 19: 3 select cd/vcd and press enter, 4 set analog out to, 2 channel, 6 channel, 5 set digital out (from optical out) to, Bitstream, 6 press setup to save and exit

Connections

Getting Sta

rted

tup

Basic

Ope

rations

vanc

atures

CD/VCD Setting

Follow these steps to set the outgoing analog and digital audio for-

mat of CD and VCD tracks:
1

From Stop mode, press SETUP.

Select Audio and press ENTER.

Select CD/VCD and press ENTER.

Set Analog Out to:

2 Channel

(default) To output 2 channel stereo audio from

the stereo audio outputs; e.g., to a VCR or TV.

6 Channel

To enjoy Pro Logic surround sound during CD

and VCD playback from the 5.1 channel analog audio outputs.

Make sure Pro Logic is enabled; see page 16.

Set Digital Out (from Optical Out) to:

PCM

(default) To output 2 channel digital audio from the optical/coaxial digital audio outputs; e.g., to a Minidisc recorder.

Bitstream

To output the digital bitstream from the optical/coaxial digital audio outputs; e.g., to an external amplifier.

Off

To disable CD/VCD audio output.

Press SETUP to save and exit.

UG.book Page 15 Thursday, January 9, 2003 10:05 AM