GoVideo DVP1100 - Manual (Page 18)

14
DVP1
100 DVD Player
DTS Setting
Follow these steps to set the analog and digital audio formats of out-
going DTS (Digital Theater Sound) soundtracks:
1
From Stop mode, press SETUP.
2 Select Audio and press ENTER.
3 Select DTS and press ENTER.
4 Set Analog Out to:
6 Channel (default) To output DTS 5.1 channel audio from
the 5.1 channel analog audio outputs; e.g., to a 5.1 channel
amplifier.
2 Channel To output downmixed 2 channel stereo from the
stereo audio outputs; e.g., to a VCR or TV.
Off To disable DTS analog output.
5 Set Digital Out to:
PCM (default) To output 2 channel digital audio from the optical/coaxial digital audio outputs; e.g., to a Minidisc recorder.
Bitstream To output the raw DTS digital bitstream from the optical/coaxial digital audio outputs; e.g., to an external ampli-
fier with a DTS decoder.
Off To disable DTS output.
6 Press SETUP to save and exit
MP3 Setting
Follow these steps to set the outgoing digital audio format of MP3
tracks (Note: The analog format is fixed to 2 channel):
1
From Stop mode, press SETUP.
2 Select Audio and press ENTER.
3 Select MP3 and press ENTER.
4 Set Digital Out to:
PCM (default) To output 2 channel digital audio from the opti-
cal/coaxial digital audio outputs; e.g., to a Minidisc recorder.
Off To disable MP3 digital output.
5 Press SETUP to save and exit
UG.book Page 14 Thursday, January 9, 2003 10:05 AM