GarrettCom 8000X User Manual
Page 43
Magnum 8000X Mixed-Media Fiber Hubs Installation and User Guide (05/ 02)
36
www GarrettCom com
.
.
cord is supplied with each unit. (Units shipped from the GCI factory to outside the
United States and Canada will not include a 115 vac power cord.)
The Magnum 8000X supports installation environments where the AC
voltage ranges from 90 - 260 volts with a power input frequency of between 47 - 63 Hz
and will consume no more than a maximum of 30 watts. The power connector is located
on the back of the unit. In order to power down the unit, simply unplug the unit’s power
cable In a stacked configuration, this will NOT affect the operation of other units in the
stack. When connecting various Ethernet media, there is no need to power down the
8000X unit. Individual segments of any media type can be connected or disconnected
from PMs without concern for AC power -related problems or damage to the unit.