Gateway E-2500D - Manual (Page 55)

50 www.gateway.com
Chapter 5: Maintaining Your Computer
Opening the case
Your computer case provides easy access to internal components.
Removing the side panel
To remove the side panel:
1
Follow the instructions in “Preventing static electricity discharge” on page 49 .
2
Shut down your computer, then disconnect the power cord and modem, network,
and all peripheral device cables.
3
Press the power button to drain any residual power from your computer.
4
Remove the thumbscrews from the side panel cover. For the location of the
thumbscrews, see
“Back” on page 10 .
5
Squeeze the cover release lever to the side to release the cover.
Warning
To avoid exposure to dangerous electrical voltages and moving parts,
turn off your computer, then unplug the power cord, modem cable,
and network cable before opening the case.
Cover
release lever
8510807.book Page 50 Thursday, June 30, 2005 7:27 AM