Grizzly G0493 - Manual (Page 63)

Model g0493 (Mfg. since 7/10)
-61-
h3388—14" carbide tipped saw blade, 80t
h3389—14" carbide tipped saw blade, 100t
these blades are designed especially for slid-
ing table saws and manufactured for heavy-duty
use.
figure 124. Carbide-tipped saw blade.
h4935—stackable scoring blade set
the scoring blade set consists of an inner and
outer blade and four internal shims. two shims
are 0.008" thick and two are 0.004". the shims
are provided so the scoring blade set can match
the kerf thickness of the main blade.
figure 125. h4935 scoring Blade set.
some aftermarket accessories can be
installed on this machine that could cause
it to function improperly, increasing the risk
of serious personal injury. to minimize this
risk, only install accessories recommended
for this machine by grizzly.
NOTICE
refer to the newest copy of the grizzly
catalog for other accessories available for
this machine.
section 6: aftermarKet
accessories from grizzly
figure 123. h7833 fully enclosed blade guard
for Model g0493.
h7833—fully enclosed blade guard
this fully enclosed blade guard was specially
designed for the Model g0493, and dramatically
improves dust collection over the standard dust
hood. this is important if the saw will be used for
cutting a lot of osB, MdF, or other engineered
sheet goods that contain formaldahyde or other
voC's, which can result in more toxic dust than
natural wood alone. proper collection of this dust
is especially important in workplace settings
where exposure occurs daily. includes a sturdy
mounting arm constructed from steel tube and
2.5" dust port for superb dust collection.