Grizzly G0493 - Manual (Page 4)

-2-
Model g0493 (Mfg. since 7/10)
introduction
With over 10' of table travel, the Model g0493
14" sliding table saw can easily handle full-size
sheet goods with room to spare. Maximum sheet
size is 123" x 126" with the crosscutting table, and
48" wide with the traditional rip fence.
this saw has a 10 hp main motor for ample cut-
ting power and a dedicated 1 hp scoring blade
motor, so the main motor does not have to drive
both blades.
dust collection is handled by one 5" main dust
hood and one 2.5" blade guard dust hood.
however, an optional fully enclosed blade guard
is also available for this saw.
this saw includes an nice assortment of accesso-
ries, including a hold down clamp, optional push
handle, two flip stops, an end shoe, a roller on the
crosscut table, and a push stick.
machine description
We stand behind our machines. If you have any
service questions, parts requests or general ques-
tions about the machine, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
E-Mail: [email protected]
We want your feedback on this manual. If you can
take the time, please email or write to us at the
address below and tell us how we did:
Grizzly Industrial, Inc.
C /
O
Technical Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
Email: [email protected]
contact info
We are proud to offer this manual with your new
machine! We've made every effort to be exact
with the instructions, specifications, drawings,
and photographs of the machine we used when
writing this manual. However, sometimes we still
make an occasional mistake.
Also, owing to our policy of continuous improve-
ment,
your machine may not exactly match the
manual. If you find this to be the case, and the dif-
ference between the manual and machine leaves
you in doubt, check our website for the latest
manual update or call technical support for help.
Before calling, find the manufacture date of your
machine by looking at the date stamped into the
machine ID label (see below). This will help us
determine if the manual version you received
matches the manufacture date of your machine.
For your convenience, we post all available man-
uals and manual updates for free on our website
at
www.grizzly.com. Any updates to your model
of machine will be reflected in these documents
as soon as they are complete.
Manufacture Date
of Your Machine
manual accuracy