Genicom LA36 User Manual

Page 66

4-9

Using Set-Up Mode

3. Print the menu of the left margin option.

Since you only want to change the left margin, press the

button to select the current

protocol. The bolded

PORT DEPND

is underlined, and the next option

is printed. (The bolded value indicates the current setting, and the underlined value is the
new setting.) Repeatedly press the

button until the

option and its

value are printed.

4. Change the left margin from column 1 to column 20.

Press and hold the

button until the printer beeps nineteen times. When the button is

released, the new value is printed next to the current value. If the new value is not

20 COL

, repeat this operation. If it is

20 COL

, press the

button to select

20 COL

is underlined, and the next option,

and its value are printed.

5. Exit the Macro 2 function.

Since you do not want to make any other changes in

MACRO 2

, press the

Exit/Save

button. The

menu is then reprinted, and the red cursor is positioned

beneath

SAVE&EXIT

6. Exit the Set-Up mode, saving or not saving the new left margin.

Press the

button or the

button to save 20 columns as the new power-on default in

Macro 2 and exit Macro 2. The printer then exits the Set-Up mode and returns to the
Ready state. These settings remain in effect until the next time they are changed.

Press the

Set-Up/Quit

button if you do not intend saving these settings in Macro 2.

Options with Both Pre-determined and Undetermined Values

Some options include both types of values. Undetermined values appear at the end of the list
of pre-determined values, identified by the unit of the corresponding range.

For example, when you select the