GE DS-82 - Manual (Page 209)

Chapter 6: Command Line Interface
GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual 205
Configure PoE -- Port
poe enable
Description:
Enabling or disabling the port POE injects function.
Command Level:
Global Configuration
Syntax:
poe enable []
[no] poe enable []
Parameters:
specifies the ports to be set. If not entered, all ports are set.
Example:
Switch(config)# poe enable 1
Switch(config)# show poe status 1
Port Admin Oper Priority Power Limit[W]
Current
Consumption [W]
Current[mA]
Device
Class
Port1 Enable on High 15.4 13.4 279 0
Switch(config)# no poe enable 1
Switch(config)# show poe status 1
Port Admin Oper Priority Power Limit[W]
Current
Consumption [W]
Current[mA]
Device
Class
Port1 Disable off High 15.4 -- -- 0