GE DS-82 - Manual (Page 185)

Chapter 6: Command Line Interface
GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual 181
Description:
Set spanning tree port priority.
Syntax:
spanning-tree port priority <0-240> []
Parameters:
<0-240> specifies the port priority. The value must be in steps of 16.
specifies the ports to be set. Null means all ports.
show spanning-tree
Description:
Show spanning-tree information.
show spanning-tree port
Description:
Show spanning tree per port information.
Syntax:
show spanning-tree port []
Parameters:
specifies the port to be shown. Null means all ports.
The remaining commands in this section are only for system with RSTP (rapid
spanning tree, 802.1w) capability:
spanning-tree debug
Description:
Enable or disable spanning tree debugging information.