GE DS-82 - Manual (Page 206)

Chapter 6: Command Line Interface
202 GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual
show poe status
Description:
Show per PoE port information
Command Level
Global Configuration
Syntax:
show poe status []
Parameters:
specifies the ports to be set. If not entered, all ports are set.
Example 1:
Switch(config)# show poe status 1
Port Admin Oper Priority Power Limit[W]
Current
Consumption [W]
Current[mA]
Device
Class
Port1 Enable on Low 15.4 13.4 279 0
Example 2:
Switch(config)# show poe status
Port Admin Oper Priority Power Limit[W]
Current
Consumption [W]
Current[mA]
Device
Class
Port1 Enable on Low 15.4 13.4 279 0
Port2 Enable on Low 15.4 11.3 236 0
Port3 Enable on Low 15.4 6.5 135 3
Port4 Enable off Low 15.4 0 0 0
Port5 Enable off Low 15.4 0 0 0
Port6 Enable off Low 15.4 0 0 0
Port7 Enable off Low 15.4 0 0 0
Port8 Enable off Low 15.4 0 0 0
Port9 Enable off Low 15.4 0 0 0
Port10 Enable off Low 15.4
0
0
0