Grizzly G8692 - Manual (Page 11)

-10- G8692 Portable Bandsaw and Stand
After all the parts have been removed from
the crate, you should have:
1. Portable bandsaw (not shown)
2. Bandsaw bench stand with vise (not shown)
3. 4 Rubber work stand feet
4. Removable handle
5. 4 M6-1.0 x 25 mm Phillips head screws
6. 4 Washers 6mm
7. Hex keys 4,5,6 mm
8. Guide bar
9. 2 M5-.8 x 10mm flat-head Phillips screws
10. 2 Universal motor brushes
In the event that any non-proprietary parts are
missing (e.g. nuts or washers), we would be glad
to replace them, or for the sake of expediency,
replacements can be obtained at your local hard-
ware store.
Figure 2. Piece inventory from packing box.
Piece Inventory
The Model G8692 Portable Bandsaw was care-
fully packed at our warehouse. If you discover the
machine is damaged after you have signed for
delivery, and the truck and driver are gone, you
will need to file a freight claim with the carrier.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Without the packing materials, filing a freight
claim can be difficult. If you need assistance
determining whether you need to file a freight
claim, or with the procedure to file one, please
contact our Customer Service.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
Sharp edges on metal
parts may cause person-
al injury. Examine the
edges of all metal parts
before handling.
Unpacking
SECTION 5: SET UP
3
4
7
8
9 10
5
6